采设制标二OO八目次1总„„„„„„„„„„„„„„„„„„„„„„„„„12基规„„„„„„„„„„„„„„„„„„„„„„„12.1一规„„„„„„„„„„„„„„„„„„„„„12.2图规„„„„„„„„„„„„„„„„„„„„„12.3图标栏„„„„„„„„„„„„„„„„„„„„42.4比„„„„„„„„„„„„„„„„„„„„„„„52.5文与字„„„„„„„„„„„„„„„„„„„„62.6图„„„„„„„„„„„„„„„„„„„„„„„62.7字与号„„„„„„„„„„„„„„„„„„„„83图及法„„„„„„„„„„„„„„„„„„„„„„103.1投及图„„„„„„„„„„„„„„„„„„„103.2尺标„„„„„„„„„„„„„„„„„„„„133.3标„„„„„„„„„„„„„„„„„„„„„„183.4方与标„„„„„„„„„„„„„„„„„„„194图„„„„„„„„„„„„„„„„„„„„„„„„„255附„„„„„„„„„„„„„„„„„„„„„„„„„40录标用说„„„„„„„„„„„„„„„„401总1.0.1为一属非属山矿计图准实制标化高图率保图质，用少文说便表设意图使计施和产间简共语，制本准1.0.2本准用采专和建业设阶的计和图包CAD图，图涉其专时应有专制标执。1.0.3本准照际准图中用简汉、量位称及号应合家行关准规和程规。1.0.4在制质时仍用地图进复，要复图中加容，按定图绘。2基规2.1般定2.1.1图应先虑图便在合咨和设阶内深度求提，求图明清、懂2.1.2工咨和计纸度单，论面和中文说明均以（）的量位示2.1.3各询各计段图均编图目，纸录符合2.1.3规、容要，纸录序应各询设位行定各计业编顺、项施图计段编号序孙（工设阶）号序行制图2.1.31图2.1.3纸录面式2.1.4应据同询计段不设专要，用当规格比的纸图布要理图表设内、求完、简，形影确图数、字符表准，种条细合标规。2.1.5标技术应用《金山矿语准YS/T502294的关定2.2图规2.2.1阶设图的面图尺，符图2.2.1表2.2.11规。殊况可表2.2.11的A0A3纸长或加。A0纸能长边A1A3纸、边可长加部应原长1/8其数数按幅格2.2.12取图2.2.11A0A1A2A3纸式面图2.2.12A4纸式面图2.2.13A1A2A3纸式面2表2.2.11图幅及框寸mm幅代A0A1A2A3A4BL8411189594841420594297420210297a25c105规系210.50.250.125表2.2.12图规表mm基幅长延短延两放代规系BL规BL规BL规BL系系系84113372.25A0284114862.5841118984116352.7584117833.05949461.1256688411.1256689461.2759410511.257438411.2574310511.56A1159411561.3758178411.37581711561.8959484159412611.58928411.559413361.62559414721.754207430.6255255940.6254208920.756315940.75A20.542010400.8757365940.87542059442011891.042013371.12542014861.252975250.31253714200.31252976310.375A30.252977360.43752974202978410.52979460.562529710510.625A40.1252102972102972.2.2A0A1A2纸框有确尺标分应图框角零，纵方排。寸格为100mm小长10mm别粗线细线界标线长别3mm2mm标3数应于格界附。2.3纸题2.3.1图必设标栏以明图名、计段设日期版、计和级核等标栏位图右角A4图位图下。殊况可于纸上。2.3.2国外程纸题均采以两格，图2.3.21和2.3.22示格一要于A0A3纸格二要于A4A3式纸国工设图无殊求，以注外文图2.3.21纸题格一32064图2.3.22纸题格二180642.3.3竣图纸题应合列定1竣图原工不致需新图，图标栏式中设阶栏写工。2竣图原工完一时可在施图纸题左边盖工签，章式符图2.3.3规。4竣工图图2.3.3工签格2.3.4复和用有套部图时鉴人在图标栏左加复（）签，章式符图2.3.4-1图2.3.4-2的定复图图2.3.4-1制签格图2.3.4-2复图章式2.3.5纸容要个业同认，须图内外上会栏其式符图2.3.5规。图2.3.5图会栏式2.4比2.4.1图必按例制不按例制，加说。2.4.2应当取图例使面局理美、晰紧，制比宜1（125×10n列用特情时取间例2.4.3同视，用向横两不比绘时应以明细较，不要细注视，不比绘。2.4.4比的示法注位应合列定51表方：例须用拉数表，如1:21:50。2注位：⑴全只一比时应比注在题内⑵同图例写相视名下，符图2.4.4规。平图ⅠⅠ1:501:50图2.4.4图例注2.4.5工图用例按2.4.5取表2.4.5矿图用...
