下载后可任意编辑机床后托架加工工艺及夹具设计样稿模板12024 年 4 月 19 日下载后可任意编辑攀枝花学院本科毕业设计( 论文) CA6140 车床后托架加工工艺及夹具设计学生姓名: 王 中 蔚 学生学号: ZJD02043 院 ( 系) : 机电工程学院 年级专业: 02 机械制造及自动化 指导老师: 卢宗彪 副教授 二〇〇六年六月2024 年 4 月 19 日下载后可任意编辑摘 要在生产过程中, 使生产对象( 原材料, 毛坯, 零件或总成等) 的质和量的状态发生直接变化的过程叫工艺过程, 如毛坯制造, 机械加工, 热处理, 装配等都称之为工艺过程。在制定工艺过程中, 要确定各工序的安装工位和该工序需要的工步, 加工该工序的机车及机床的进给量, 切削深度, 主轴转速和切削速度, 该工序的夹具, 刀具及量具, 还有走刀次数和走刀长度, 最后计算该工序的基本时间, 辅助时间和工作地服务时间。 关键词 工序, 工艺, 工步, 加工余量, 定位方案, 夹紧力2024 年 4 月 19 日下载后可任意编辑I2024 年 4 月 19 日下载后可任意编辑ABSTRACTEnable producing the target in process of production (raw materials, the blank , state of quality and quantity on part become always ) take place direct course of change ask craft course, if the blank is made, machining, heat treatment , assemble etc. and call it the craft course. In the course of making the craft , is it confirm every erector location and worker step that process need this of process to want, the locomotive of processing , this process , and the entering the giving amount of the lathe, cut depth , the rotational speed of the main shaft and speed of cutting, the jig of this process, the cutter and measuring tool, a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves, calculate basic time of this process , auxiliary time and service time of place of working finally.Keywords: The process, worker one, worker's step , the surplus of processing, orient the scheme , clamp st...