COBY STANDARD 深圳高飞电讯有限公司 SHENZHEN COBY COMMUNICATION CO., LTD. -----------------------------------------------------------------------------------------------------------------------------------------------------------------------The information contained in this document is the exclusive property of Coby communication Co.,Ltd. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of Coby communication Co.,Ltd Page 1 of 16 移动互联网设备接受标准 Ver :1.0 Issued Date: August- 31 - 2010 Approved By: Prepared By: Kevin Wong This specification is subject to change without prior notice 本规范如有更改,恕不另行通知 COBY STANDARD 深圳高飞电讯有限公司 SHENZHEN COBY COMMUNICATION CO., LTD. -----------------------------------------------------------------------------------------------------------------------------------------------------------------------The information contained in this document is the exclusive property of Coby communication Co.,Ltd. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of Coby communication Co.,Ltd Page 2 of 16 1、目的(Purpose): 本标准由深圳高飞电讯有限公司(以下简称 高飞公司)制定,用于检验移动互联网设备的功能及外观方面的指导性文件,本标准详细阐述了检验条件、接受及判退的品质标准,为功能和外观检验提供科学、客观的方法。 This standard has been established by Shenzhen COBY COMMUNICATIONS CO., LTD. (hereinafter referred to as “COBY”). The purpose of this standard is to establish a test method of MID functions and appearance inspection and provides an judgement standard for acceptable and unacceptable. 2、 范围(Scope) 2.1、 本标准适用于高飞公司所生产的或者协力厂商为高飞公司代加工移动互联网设备的功能及外观检验过程。 This standard applies to MID inspection produced...