光学调角器控制设计VIP专享

北京理工大学珠海学院 2020 届本科生毕业设计光学调角器控制设计光学调角器控制部分设计摘 要本论文旨在为测量角度的光学调角器完成控制部分设计。光学调角器用于广角数据测量的光学调角器，在监控安装前，拟定测量位置，通过光学调角器，可测量得到目标距离、目标可视范围（宽、高）、广角，从而确定镜头的焦距、类型。解决安装调试的繁琐流程，解决安装的位置，达到准确选取合适的镜头广角、焦距以及缩短安装时间。关键词：光学测量、80C51 单片机、步进电机 、激光测距仪北京理工大学珠海学院 2020 届本科生毕业设计AbstractThe purpose of this paper is to complete the design of the control part for the optical angle adjuster that measures the angle. Optical angle adjuster The optical angle adjuster used for wide-angle data measurement. Before monitoring and installation, the measurement position is planned. Through the optical angle adjuster, the target distance, target visible range (wide and high) and wide angle can be measured to determine the lens Focal length, type. Solve the cumbersome process of installation and debugging, solve the installation position, achieve the accurate selection of the appropriate lens wide angle, focal length and shorten the installation time.Keywords: optical measurement, 80C51 single-chip microcomputer, stepper motor, laser rangefinder北京理工大学珠海学院 2020 届本科生毕业设计目 录1 前言.............................................................................................................................................................11.1 本设计的目的、意义及应达到的技术要求..................................................................................3北京理工大学珠海学院 2020 届本科生毕业设计1.1.1 本设计的目的......................................................................................................................31.1.2 本设计的意义................................................................................................