PROTOCOLSPECIFICATION设备对接协议书范本VIP专享

HUSKY MACHINE OPERATIONSThis manual describes the interface between a Husky Injection Molding Machine with the Husky Host Interface option and the Host system. An overview of the system and a detailed command set are given. This manual is issued by the Systems Software Group.SPECIFICATION SUBJECT TO CHANGEHusky Injection Molding Systems Ltd.Machine Operations560 Queen Street SouthBolton, Ontario, CanadaL7E 5S5HUSKY HOST INTERFACE PROTOCOL SPECIFICATIONREVISION RECORDRevisionDateComments1.001994 12 12Initial Release.1.011995 4 11Added text data variable support, reformatted.1.021995 5 15Cleaned up per MD, SPC II and Tandem updates.1.031995 7 28Restored reference to RFC 1179 for printing.2.001998 4 17Updated for G-Line, added Event Function, updated variable list, much cleanup.2.011999 10 12Added Status Function.2.021999 11 08Change references to “Alarm” to “Cycle Interruption”Contents1.INTRODUCTION12.SYSTEM OVERVIEW23.FUNCTIONS33.1 Host Display Interface33.2 Sending Machine Set-ups to Host33.3 Receiving Machine Set-ups from Host43.4 Read Process Data53.5 Events53.6 Cycle Interruptions53.7 SPC63.8 Machine Status63.9 Remote Printing64.TECHNICAL IMPLEMENTATION74.1 Communications Interface74.2 Application Interface84.2.1Type 1 - Machine Functions84.2.1.1Initialize the connection114.2.1.2Start of job124.2.1.3Languages134.2.1.4List process variable154.2.1.5Reading process variables174.2.1.6End of cycle184.2.1.7Events194.2.1.8Cycle Interruptions204.2.1.9SPC parameters224.2.1.10 Machine Status244.2.1.11 Up-load a machine set-up254.2.1.12 Error294.2.2Type 2 - Display Interface304.2.2.1Initialize the connection314.2.2.2Start or refresh the display324.2.2.3Stop the display334.2.2.4Key-stroke message344.2.2.5Screen display command354.2.2.6Menu key command364.2.2.7Errors374.2.3Type 3 - Rem...