水溶性聚合物对乳液聚合体系的影响大学毕业答辩论文毕业设计(论文)说明书学生姓名纪春涛学院名称化工学院专 业化学工程与工艺学 号指导老师袁才登职 称副教授 2025 年 6 月 22 日毕业设计(论文)任务书题目:水溶性聚合物对乳液聚合体系的影响学生姓名纪春涛学院名称化工学院专 业化学工程与工艺学 号指导老师袁才登职 称副教授一、原始依据(包括设计或论文的工作基础、讨论条件、应用环境、工作目的等) 水溶性聚合在乳液聚合中应用很广泛,尤其在印刷、油墨树脂等领域,用作油墨粘接剂、分散剂等多种树脂均需要具备较高酸值的乳液聚合物,制备该类树脂最有效的方法就是采纳可碱溶的水溶性聚合物。但水溶性聚合物的大量添加,会导致聚合过程稳定性、聚合物乳液的粘度等多种性能与普通的聚合及聚合物乳液完全不同。本工作拟考察多种水溶性聚合物及在不同水溶性聚合物用量的情况下乳液聚合的动力学规律,同时也会考察某些单体与水溶性聚合物配合的情况,分析在水溶性聚合物存在下,乳液聚合动力规律(成核过程)的可能变化趋势,从而加强对水溶性聚合物参加的乳液聚合的调控性。二、参考文献 [1]Hale Berber, Ayfer Sarac. Synthesis and characterization of water-based poly(vinyl acetate-co-butyl acrylate) latexes containing oligomeric protective colloid [J]., 2025, 66(11): 881-892.[2]Sarac A, Yildirim H. Effect of initiators and ethoxylation degree of non-ionic emulsifiers on vinyl acetate and butyl acrylate emulsion copolymerization in the loop reactor [J]. J Appl Polym Sci, 2025, 90(8): 537-543.[3]Kubo M, Hayakawa N, Minami Y, Tamura M, Uno T, Itoh T et al. Preparation of mechanically cross-linked poly(vinyl alcohol) [J]. Polym Bull, 2025, 52(5): 201-207.[4]Craig D H. The effect of molecuar weight on grafting reactions of hydroxyethyl cellulose during emulsions polymerization of vinyl monomers [J]. Polym. Mat Sci Eng, 1985, 52(13): 104-106.[5]Ken Yuki, Masato Nakamae, Toshiaki Sato et al. Physical properties of copolymer emulsions using poly (vinyl alcoho1) as a protective colloid in comparison with those ...