基于 Simulink 的扩频调制模块设计摘 要 本文阐述了扩展频谱通信技术的理论基础和实现方法，利用 MATLAB 提供的可视化工具 Simulink 建立了扩频通信系统仿真模型，详细讲述了各模块的设计，并指出了仿真建模中要注意的问题。在给定仿真条件下，运行了仿真程序，得到了预期的仿真结果。同时，利用建立的仿真系统，讨论了扩频增益与输出端信噪比的关系，结果表明，在相同误码率下，增大扩频增益，可以提高系统输出端的信噪比，从而提高通信系统的抗干扰能力 关键词 扩频，通信，matlabSimulink module based on the design of spread spectrum modulationZhang JunAbstract: The theory base and realizing methods of the spread spectrum communication technology was presented in this study. The simulation model of the spread spectrum communication system was built by using SIMULINK, which is provided by MATLAB. In addition, each module of the simulation model was introduced in detail，and pointed out the problems that must be pay attention to in the system simulation. On the basis of the designed simulation conditions, the simulation program was run and the anticipant results were gained. Moreover, the relationship between the spread spectrum gain and the fan-out error rate was also studied by use of the simulation system. The results showed that on the base of the same error rate, if the spread spectrum gain was enlarged, the Signal-to-Noise of the system fan-out would be enhanced and the anti-jamming capability of the communication system would also be enhanced. Keywords: spread spectrum communication, Signal-to-Noise, error rate, spread spectrum gain前 言扩频通信是指用于传输信号的信道带宽远远大于信号自身贷款的一种通信方式，它在抗噪声、抗干扰、抗多径衰落、码分多址、信号隐蔽性和保密性等方面具有较传统无线通信方式无可比拟的优势，从而与光纤通信、卫星通信一同被誉为信息时代三大主流通信传输方式。由于扩频通信独具特色，自诞生之日起，就受到军方的极大重...
