PICMG_3_2_Shortform原版完整文件

PICMG® 3.2 R 1.0InfiniBand® for AdvancedTCA™ Systems Short Form SpecificationJanuary 22, 2003FOR INFORMATION ONLY; DO NOT ATTEMPT TO DESIGN FROM THIS DOCUMENTNOTE: This short form specification is a subset of the InfiniBand® for AdvancedTCA™ Systems specification, PICMG 3.2 R 1.0. For complete guidelines on the design of InfiniBand® for AdvancedTCA™ implementations, the full specification is required.To order a full copy of the PICMG 3.2 specification, go to www.picmg.org, or contact the PCI Industrial Computer Manufacturers Group at 401 Edgewater Place, Suite 500, Wakefield, Mass., 01880. Phone 781-246-9318, fax 781-224-1239, email info@picmg.org.Copyright 2003 PCI Industrial Computer Manufacturers Group.PICMG disclaims all warranties and liability for the use of this document and the information contained herein, and assumes no responsibility for any errors or omissions that may appear in this document, nor is PICMG responsible for any incidental or consequential damages resulting from the use of any data contained in this document, nor does PICMG assume any responsibility to update or correct any information in this publication.PICMG, CompactPCI, and the PICMG and CompactPCI logos are registered trademarks, and AdvancedTCA and ATCA and the AdvancedTCA and ATCA logos are trademarks of the PCI Industrial Computer Manufacturers Group. InfiniBand is a registered trademark of the InfiniBand Trade Association. All other brand or product names may be trademarks or registered trademarks of their respective holders.FOR INFORMATION ONLY;DO NOT ATTEMPT TO DESIGN FROM THIS DOCUMENTEthernet/Fibre Channel for AdvancedTCA™ Systems Short Form IntroductionThe complete PICMG 3.2 Specification is a member of the PICMG 3....