1.1.1 安装操作系统 通过光盘启动系统来进行操作系统的安装，其具体步骤如下： 给主机上电，等主机面板的荧光条显示“OK”。 将 AIX 6.1 安装盘的第一张光盘放入光驱，打开机器上的电源开关按钮，启动机器。 当图形终端显示如下信息时按„F1‟键。进入“System Management Services”图形功能菜单。 1 SMS Menu 5 Default boot list 8 Open FirmWare Prompt 6 Storeage（待补充） memory keyboard network scsi speaker 选 1，进入如下界面 Please enter the service processor „admin‟ account password 缺省输入“admin” 进入如下界面： PowerPC Firmware Version SF230-120 SMS 1.6(c) Copyright IBM Corp Main Menu Select Language Setup Remote IPL(Initial Program Load) Change SCSI Settings Select Console Select Boot Options 选择 5 进入如下界面 PowerPC Firmware Version SF230_120 SMS 1.6 © Copyright IBM Corp. 2000,2005 All right reserved. Multiboot Select Install /Boot Device Configure Boot Device Order Multiboot Startup (OFF) 选择 1，然后进入如下界面 PowerPC Firmware Version SF230_120 SMS 1.6 © Copyright IBM Corp. 2000,2005 All right reserved. Select Device Type Diskette Tape CD/DVD IDE Hard Drive Network List all Devices 选择 4 ，进入如下界面 PowerPC Firmware Version SF230_120 SMS 1.6 © Copyright IBM Corp. 2000,2005 All right reserved. Select Device Device Current Device Number Position Name 1. - IDE CD-ROM (loc=U787B.001.DNW3F7F-P4-D2) 选择 1，然后进入如下界面： PowerPC Firmware Version SF230_120 SMS 1.6 © Copyright IBM Corp. 2000,2005 All right reserved. Select Task IDE CD-ROM (loc-U787B.001.DNW3F7F-P4-D2) Information Normal Mode Boot Service Mode Boot 选择 2，然后进入如下界面 PowerPC Firmware Version SF230_120 SMS 1.6 © Copyright IBM Corp. 2000,2005 All right reserved. Are you sure you want to exit System Management Services? Yes No 选择 1，然后进入软件安装启动界面，系统在通过光盘引导下开始...
