1DIGITAL DC DRIVEISSUE： ×.×2*MENU LEVEL菜单3**DIAGNOSTICS诊断4***SPEED DEMAND速度给定[089]XXX.XX%0.00%只读4***SPEED FEEDBACK速度反馈[207]XXX.XX%0.00%只读4***SPEED ERROR速度误差[297]XXX.XX%0.00%只读4***SPD LOOP OUTPUT速度环输出[356]XXX.XX%0.00%只读4***CURRENT DEMAND电流给定[299]XXX.XX%0.00%只读4***CURRENT FEEDBACK电流反馈[298]XXX.XX%0.00%只读4***CURRENT FBK. AMPS电流反馈安培[538]XXXX.XAMPS0.0AMPS安培只读4***IaFbk UNFILTERED电流反馈未滤波[065]XXX.X%(h)只读4***IaDmd UNFILTERED电流给定未滤波[066]XXX.X%(h)只读4***POS. I CLAMP正电流箝位[087]XXX.X%(h)0.0%只读4***NEG. I CLAMP负电流箝位[088]XXX.X%(h)0.0%只读4***ACTUAL POS I LIM有效正电流限幅[067]XXX.X%(h)0.0%只读4***ACTUAL NEG I LIM有效负电流限幅[061]XXX.X%(h)0.0%只读4***INVERSE TIME O/P反向时间输出[203]XXX.XX%200.00%只读4***DRIVE START驱动器启动[082]0:OFF; 1:ONOFF只读0~70:STOP 停止1:STOP 停止2:RUN 运行7:CRAWL爬行只读STOP***OPERATING MODE只读只读只读只读读/写只读只读只读菜单层标记号出厂设置设定范围6:INCH/JOG 2 渐进/点动24运转模式 （点动/缓慢）[212][084]3:TAKE-UP SLACK 1 拉紧放松14:TAKE-UP SLACK 2 拉紧放松25:INCH/JOG 1 渐进/点动14***DRIVE ENABLE驱动器使能中文解释操作面板英文显示[042][077][079][112][113][080]***AT STANDSTILL0:DISABLED禁止;1:ENABLED使能DISABLED禁止处于静止堵转跳闸斜坡程序停机4***AT CURRENT LIMIT处于电流极限处于零速***AT ZERO SPEED40:FALS虚;1:TRUE真FALSE虚0:FALSE虚;1:TRUE真0:FALSE虚;1:TRUE真TRUE真0:0K正确1:FAILED失败0:FALSE虚;1:TRUE真0:FALSE虚;1:TRUE真TRUE真OK正确FALSE虚TRUE真0:FALSE虚;1:TRUE真TRUE真***RAMPING***PROGRAM STOP4444***STALL TRIP欧陆590+参数说明表——按MMI菜单顺序只读4***AT ZERO SETPOINT处于零设定值[078]第 1 页，共 18 页4***FIELD DEMAND励磁给定[183]XXX.XX%0.00%只读4***FIELD I FBK.励磁电流反馈[300]XXX.XX%0.00%只读4***FIELD I FBK. AMPA励磁电流反馈安培[539]XXXX.XAMPS0.0 AMPS安培只读4***RAW FIELD FBK.原始励磁电流反馈[181]XXX.XX%0.00%只读4***FLD. FIRING ANGLE励磁触发角[184]XXX.XX DEG0 DEG度只读4***ANIN 1 (A2)模拟输入1 (A2)[050...
