北京理工大学珠海学院 2020 届本科生毕业设计年产 1 万吨发泡用 eva 树脂的生产工艺流程设计北京理工大学珠海学院 2020 届本科生毕业设计年产一万吨发泡用 eva 树脂的生产工艺流程设计摘 要本设计拟生产 10000 吨 EVA 树脂。分析了 EVA 的性能特点和市场需求以及发展趋势,并对比了目前 EVA 树脂的生产配方以及生产工艺,最终本设计确定使用高压本体聚合法的生产工艺,相应的选择了合适的 EVA 树脂的生产原料、助剂以及其生产配方,以及设计出合理的制备方案和设备流程等给出关于 EVA 生产的具体工艺参数。每批乙烯投入量 6293.06kg,醋酸乙烯酯投入量 1398.458kg,丙烯投入量 38.846Kg,生产聚合物总质量 1932.591Kg,根据所选择的工艺流程路线绘制出带控制点的工艺流程图,并且根据实际情况对工艺路线进行可行性分析,指出可能会出现的问题和解决的方案。同时根据选择的配方进行物料衡算、热量衡算和设备的尺寸计算。最后本设计对三废处理,包括废气处理、废水处理和废渣处理也进行了相应的规划。关键词:EVA;高压本体法;聚合工艺设计;物料及热量衡算;三废处理北京理工大学珠海学院 2020 届本科生毕业设计Annual production process design of Eva resin for 10,000 tons of foamingAbstractThis design intends to produce 10,000 tons of EVA resin.First of all the performance characteristics, market demand and development trend of EVA are analyzed, and the current production formula and production process of EVA resin are compared. Finally, the design determines the production process using high-pressure bulk polymerization method, and selects the appropriate EVA resin production materials accordingly , Additives and their production formulas, as well as the design of reasonable preparation schemes and equipment processes, etc., give specific process parameters about EVA production. And then,the amount of ethylene input per batch is 6293.06kg,and the amount of vinyl acetate input is 1398.458kg, and the amount of Acrylic input is 38.846Kg, the total mass of the produced polymer is 1932.591Kg, the...