USB接口数码显微镜说明VIP免费

User instru ctions 1z Introduction Thank you for your choice of our product - it is a high-tech while easy to use Digital Microscope. With this unit you may see a unique & “bigger” world. It is applicable in many fields such as visual inspection on electronic components, and materials in a full range of uses, beauty shop and education. We recommend you reading this manual FIRST to get the best out of this unit. Computer System Requirements:  Windows 98SE/ME/2000/XP/VISTA  P4 1.8 or above  RAM: 256M  Video Memory: 32M  USB port: 2.0  CD-ROM Drive z Technical Specifications 2z Install the software Insert the driver CD into CD-ROM Drive and this will automatically display the following interface: 1. Install the driver by clicking install Microscope Driver A Install Shield Wizard will walk you through the whole process. Click the “Next” button to continue. In this process a message box will appear on the screen. Please click on “Continue Anyway”. (Some versions of drivers may not be tested by Windows Lab testing. However it is safe for both your software and hardware) 3 2. Install the MicroCapture softw are Click install MicroCapture software and then reboot the system when asked. 3. You can also browse the User’s manual in PDF format and the CD contents by choosing the corresponding menus. Connecting the Microscope to Computer 1. When using a Windows XP operating system, the following “Found New Hardware Wizard ” screen will appear upon connecting the unit to your PC via the USB port. Select the “Install the software automatically (Recommended)” option and click the “Next” button. 4 2. Click the “Continue Anyway” button on the message box that appears. 3. Clic...