DINEN100021熔敷金属室温拉伸试验

ICS 77.040.10Metallische Werkstoffe – Zugversuch – Teil 1: Prüfverfahren beiRaumtemperaturEuropean Standard EN 10002-1 : 2001 has the status of a DIN Standard.A comma is used as the decimal marker.National forew ordThis standard has been prepared by ECISS/TC 1.The responsible German body involved in the preparation of this standard was the NormenausschussMaterialprüfung (Materials Testing Standards Committee), Technical Committee Prüfverfahren mit zügigerBeanspruchung für Metalle.DIN EN 10002-1 conforms in most respects with ISO 6892, except for Annex A, which has been added tocover computer-controlled tensile testing machines.It should be noted that in Germany DIN50125 continues to be valid to deal with the form, dimensions anddesignation of tensile test pieces.See National Annex for designation of percentage elongation after fracture.AmendmentsThis standard differs from the April 1991 edition as follows:a) The limits for the strain rate have been changed.b) Methods if determining the percentage total elongation at maximum force and the percentagereduction of area have been included.c) Annexes A, F, H and J have been included.Previous editionsDIN DVM 125 = DIN 50125: 1940-08, 1951-04, 1986-03; DIN DVM A 114: 1935-12;DIN 50112: 1935xx-12; DIN 50114: 1944x-01, 1960-07, 1965-12, 1980-12, 1981-08;DIN 50140: 1965-11, 1980-09; DIN 50143: 1944-10; DIN 50144: 1944-10; DIN 50145: 1952-06, 1975-05;DIN 50146: 1951-05; DIN 51210: 1961-08; DIN 51210-1: 1976-04; DIN 51210-2: 1976-04;DIN EN 10002-1:1991-04.Ref. No. DIN EN 10002-1 : 2001-12English price group 17Sales No. 111703.02DEUTSCHE NORMDecember 2001EN 10002-1{Continued overleaf.EN comprises 52 pages.© No part of this standard may be reproduced without the prior permission ofDIN...