基于 Matlab 的 AM 振幅调制与解调仿真摘要：本次高频电子电路大作业的设计，我组所选的题目为振幅调制电路（AM）及解调。在本课程设计报告中，首先说明了进行此次课程设计的目的、内容及要求；阐明了标准振幅调制与解调的基本原理以及操作方法，同时也对滤波电路的原理加以说明。接着叙述了利用 Matlab 软件对振幅调制、解调以及滤波器等所设计编写的程序，并附上了调试后输出的载波信号、调制信号、AM 已调信号及滤波前后的解调信号等的波形图和频谱图，另外还附上了滤波器的增益响应和双边带总功率与平均总功率之比。报告的最后，是个人对本次大作业结果的分析、过程反思以及总结。关键词：振幅调制 解调 AM Matlab 仿真Abstract：In The high-frequency electronic circuit designing job, our group selected the topic as amplitude modulation circuit (AM) and demodulation. In this course design report, first explains the purpose, content and requirements of the curriculum design; clarify the basic principles and methods of operation standard amplitude modulation and demodulation, and also to illustrate the principles of the filter circuit. Then describes the use of Matlab and other amplitude modulation, demodulation and filter design program written, along with the carrier signal debugging output modulation signal, AM modulated and demodulated signal waveform signal before and after filtering, etc. map and spectrum, also attached a total power and average power ratio of the total gain response and bilateral band filter. At the end of the report is to analyze the individual results of this large operation, process reflection and summary.Keywords: amplitude modulation, demodulation, Matlab simulation引言：无线通信系统中，信号通过一定的传输介质在发射机和接受机之间进行传送时，信号的原始形式一般不适合传输。因此，为了将信号从发射端传输到接下载后可任意编辑收端，必须转换它们的形式。而把信息加载到信息载体上以便传输的处理过程便是调制。通常称代表信息的信号为调制信号，称信息载体为...
