FPCQC工程图(英文版)1

1/12Docu ment NO.文件编号：文件名称Document title版本Version：A页次Page：产品Product流程Process来料检查IncomingMaterialInspection原材料检查Raw materialsinspectionIQC各来料检验作业指导书Incoming MaterialInspectionoperatinginstructions forIQCIQC来料检验作业指导书IncomingMaterialInspectionworkinginstructions forIQC检测中心的检测设备及工具Testingequipment andtools of TestingCenterIQC各来料检验作业指导书IncomingMaterialInspectionworkinginstructions forIQCIQC来料检查记录表IQC Incominginspectionrecords table退货、选别使用。特采Return,Sorting.UAI(use as is)外观Appearance《FPC成品检验规范》目视 Visual每型号第1张 TheFirst Panel Per P/N开料检查记录表Inspectionrecords Table ofCut Lamination调整Adjusted外观Appearance《FPC成品检验规范》目视 Visual100张抽1张1PNL/100PNL开料检查记录表Inspectionrecords Table ofCut Lamination报废、返工Scrapped andReworked温度/湿度Temperature/ Humidity17-26℃, ≤75%温/湿度测试仪Temperature /Humidity testinstrument1次/每班Once/shift温、湿度记录Temperature andHumidity records调整AdjustedXC-WI-PZ(IPQC)-25开料检查记录表Inspectionrecords Table ofCuttingLamination调整、报废、返工Adjusted,Scrapped andReworked参考MI和尺寸公差：+1mm/-0.5mmRef to MI andDimensionTolerance:+1mm/-0.5mm丁字尺 T square每型号第1张First Panel PerP/N评估/测量方法evaluation/measurement methods特性Characteristics特殊特性Specialfeatures尺寸Dimension抽样容量/频率Samplingcapacity /frequency产品流程标准、公差Productprocessspecification,Tolerance 开料LaminationCu tting生产机器、设备、夹具、工具Productionmachinery,equipment,fixtures,tools 开料LaminationCutting产品流程编号Productflow No流程名称/运作说明Process Name/ Descriptionoperation 开料LaminationCutting剪床 Cu tting M/C自动开料机Automaticcutting M/C 开料LaminationCu tting剪床 Cu tting M/C自动开料机Au tomatic cu ttingM/CQC Engineering chart制 定Prepared by ：审 核Checked by ：批...