ISO(TC 2)紧固件标准目录及我国采用情况(含计划) 全国紧固件标准化技术委员会 秘书处2 0 0 9 -0 1 ISO 紧固件标准目录 ISO 标准名称译文 GB 采用ISO情况 21.060.01 Fasteners in general 紧固件通用基础标准 ISO 272:1982 Fasteners -- Hexagon products -- Widths across flats 紧固件--六角产品--对边宽度 GB/T 3104-1982 eqv 1982 版本 ISO 273:1979 Fasteners -- Clearance holes for bolts and screws 紧固件--螺栓和螺钉用通孔 GB/T 5277-1985 eqv 1979 版本 ISO 1891:1979 Bolts, screws, nuts and accessories -- Terminology and nomenclature 螺栓、螺钉、螺母及附件--名词术语 GB/T 3099-1982 eqv 1979 版本 ISO 3269:2000 Fasteners -- Acceptance inspection 紧固件--验收检查 GB/T 90.1-2002 idt 2000 版本 ISO 3508:1976 Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262 符合ISO 261和ISO 262的螺纹紧固件用螺纹收尾 GB/T 3-1997第 2.1 条 等效采用1976版本 (我国由螺纹标委会归口) ISO 3800:1993 Threaded fasteners -- Axial load fatigue testing -- Test methods and evaluation of results 螺纹紧固件--轴向载荷疲劳试验 --试验方法和结果评定 GB/T 13682-1992(未采标), IDT 1993 版本, 计划2010 年完成 ISO 4042:1999 Fasteners -- Electroplated coatings 紧固件--电镀层 GB/T 5267.1-2002 idt 1999 版本 ISO 4753:1999 Fasteners -- Ends of parts with external ISO metric thread 紧固件--ISO 米制外螺纹零件的末端 GB/T 2-2001 idt I 1999 版本 ISO 4755:1983 Fasteners -- Thread undercuts for 紧固件--ISO 米制外螺纹用螺纹 GB/T 3-1997external metric ISO threads 退刀槽 第2.2 条 等效采用1983版本 (我国由螺纹标委会归口) ISO 8991:1986 Designation system for fasteners 紧固件的标记制度 GB/T 1237-2000 Eqv 1986 版本 ISO 10683:2000 Fasteners -- Non-electrolytically applied zinc flake coatings 紧固件--非电解锌片涂层 GB/T 5267.2-2002 idt 2000 版本 ISO 10684:2004 Fasteners –Hot dip...