基于单片机电梯控制系统摘要 : 本文主要介绍的是基于单片机的电梯控制系统，采用的芯片是STC89C52，实现的方法是对单片机进行编程，这类方法属于电子控制，用单片机编程来实现我们想要实现的功能，不仅方便快捷，易于操作，而且能将电梯控制系统发挥的更具体，更简洁明了，该系统体积小但功能强大，本设计模拟的是 8层电梯的控制系统，包括平时运营电梯所需要的一些基本功能，在单片机上一目了然，通过按键来选择楼层，数码管则显示实时的楼层数，用 LED 灯组成箭头，箭头的指示表示上下的方向，这次设计有效地将所学的知识运用到其中，包括STC89C52 的采用，C 语言的发挥，将书本上所学到知识运用到模拟系统中，更加于今后现有产品的更新换代以及新产品的开发。关键词：电梯；C 语言；单片机Abstract：This paper mainly introduces the elevator control system based on single chip microcomputer, the use of the chip is STE89CS, the realization of the method is the single-chip computer programming, such methods belong to the electronic control, with single-chip microcomputer programming to achieve the functions we want to achieve, not only convenient and quick, easy to operate, but also the elevator control system play a more concrete, more concise and clear. The system is small in size but powerful in function.This design simulates the control system of 8-storey elevator, including some basic functions required to operate the elevator. It can be seen at a glance on the single-chip microcomputer. The floor is selected by pressing the button, and the digital tube displays the number of floors in real time. LED lights are using to form arrow, and the arrows indicate the direction of the up and down. This design effectively applies the knowledge learned to it, including the adoption of STC89C52,the use of the C language , and the application of knowledge to the simulation system, more conducive to the future upgrading of existing products...
