外墙eifs保温系统招标技术文件

Division 13 - External Insulation Finishing System and External Wall Flexible Stucco and Coating System [Rev. F]第十三部分 - 外墙外保温装饰系统工程, 外墙外抹灰涂料工程 [修订F版]13100 External Insulation Finishing System (EIFS)外墻外保溫裝飾系統工程Before installing EIFS insulation, EIFS subcontractor to apply cementitious waterproofing around openings (min. 300mm width on plan) over exterior wall and horizontal surfaces and as indicated on plan and after pre-fixing of brackets / framework through insulation (by GRC and External Stonework Subcontractor) and seal around brackets as necessary. Except at the rear of GRC components and stonework; apply Rockshield TC or Degussa KAM (6mm min. thickness reinforced as described below) and decorative stucco finish (as described in section 13300 - External Wall Flexible Decorative Stucco and Coating Finish System) on top of the insulation. Behind GRC components and external stonework; install EIFS insulation with thinner base coat (2mm thick with one layer of reinforcing mesh) prior to installation of GRC components and stonework.由 GRC 和外挂石材分包商先在外墙安装预埋件和突出外保温板的托架/框架等构件，按图纸指示，外墙保温系统的分包商需在外墙门窗洞口周围墙体和平面覆盖上水泥性防水层（防水层宽度最少 300 毫米），并把预埋件及门窗四周的防水封严，然后按矿棉指定矿棉生产商的建议安装 EIFS 外墙外保温系统。除了有 GRC 饰件和石材的位置外，在矿棉保温板上采纳 Rockshield TC 或德固賽 KAM 涂料垫底层（6 毫米厚带加固，详本节的描述）和外抹灰装饰涂料（详 13300 章 – 外墙外抹灰涂料工程）。於 GRC 饰件及外挂石材後，在矿棉保温板上采纳比较薄的 2mm 厚涂料垫底层连一层加固网格布。最后进行 GRC 饰件和外挂石材安装工程。1.Location位置All External walls 所有外立面外墻上 2.Scope技術上描述A.Section Includes: The works of this section includes, but is not limited to, the fur...