WI 060308.04 T 811 DRAFT NO. 3 DATE March 12, 2007 TAPPI WORKING GROUP CHAIRMAN Ben Frank SUBJECT CATEGORY FISCOTEC RELATED METHODS See “Additional Information” Approved by the Standard Specific Interest Group for this Test Method TAPPI CAUTION: This Test Method may include safety precautions which are believed to be appropriate at the time of publication of the method. The intent of these is to alert the user of the method to safety issues related to such use. The user is responsible for determining that the safety precautions are complete and are appropriate to their use of the method, and for ensuring that suitable safety practices have not changed since publication of the method. This method may require the use, disposal, or both, of chemicals which may present serious health hazards to humans. Procedures for the handling of such substances are set forth on Material Safety Data Sheets which must be developed by all manufacturers and importers of potentially hazardous chemicals and maintained by all distributors of potentially hazardous chemicals. Prior to the use of this method, the user must determine whether any of the chemicals to be used or disposed of are potentially hazardous and, if so, must follow strictly the procedures specified by both the manufacturer, as well as local, state, and federal authorities for safe use and disposal of these chemicals. Edgew ise compressive strength of corrugated fiberboard (short column test) (Revision of T 811 om-02) (underscores and strikeouts indicate changes from Draft 2) 1. Scope 1.1 This method describes procedures for determining the edgewise compressive strength (ECT), perpendicular to the axis of the flutes, of a short column of single-, do...