#include #include #define uchar unsigned char #define uint unsigned int #define Dbus P0 #define buffer1ID 0x01 #define buffer2ID 0x02 #define queren 0x88 #define tuichu 0x84 #define shanchu 0x82 sbit B0=B^0; sbit B7=B^7; sbit jidianqi=P3^6; sbit RS=P2^2; sbit RW=P2^1; sbit E1=P2^0; sbit LEDK=P3^4; //控制背光 sbit SCLK=P2^3; sbit IO=P2^5; sbit RST=P2^4; uchar code ta[8]={0x00,0x51,0x09,0x10,0x05,0x02,0x11,0xbe}; uchar data a[7]; // 秒 分 时 日 月 星期 年 uchar dz[4]; //存键输入值 uchar mima[7]; uchar mimaID[6]={1,2,3,4,5,6}; uchar data K; uchar data Key; uint PageID; uchar data querenma; uchar sum[2]; int summaf,summas; uchar code nian[]={"年"}; uchar code yue[]={"月"}; uchar code ri[]={"日"}; uchar code xinqi[]={"星期"}; uchar code mao=0x3a; unsigned char code text1[]={" 请按指纹 "}; unsigned char code text2[]={" 请再次按指纹 "}; unsigned char code text3[]={" 指纹采集成功 "}; unsigned char code text4[]={"请按任意键继续 "}; unsigned char code text5[]={" 指纹采集失败 "}; unsigned char code text6[]={"输入删去的指纹号"}; unsigned char code text7[]={" 删指纹号成功 "}; unsigned char code text8[]={"按键一：增加指纹"}; unsigned char code text9[]={"按键二：删去指纹"}; unsigned char code text10[]={" 请重新按指纹 "}; unsigned char code text11[]={"清空指纹库成功 "}; unsigned char code text12[]={" 没搜索到指纹 "}; unsigned char code text13[]={"请先按键再刷指纹"}; unsigned char code text14[]={" 请重新操作 "}; unsigned char code text15[]={" 删去失败 "}; unsigned char code text16[]={" 接收包出错 "}; unsigned char code text17[]={" 编号为： "}; unsigned char code text18[]={"指纹已找到 请进"}; unsigned char code text19[]={" 该指纹已存储 "}; unsigned char code text20[]={" 请输入密码 "}; unsigned char code text21[]={" 密码错误 "}; unsigned char co...
