UDC GB 中华人民共和国国家标准 National Standard of the People’s Republic of China P GB 50168-92 电气装置安装工程 电缆线路施工及验收规范 Code for construction and acceptance of cable levels electric equipment installation engineering Issu ed date：12-16-1992 Ex ecu tion date：07-01-1993 Issued Jointly by State Bureau of Technology Supervision Ministry of Construction，PRC 本英文版为内部资料，仅供参考，以中文版为准。 The Chinese version of standards has precedence to their English translations which are only for internal reference. — 1 — 中华人民共和国国家标准 National Standard of the People’s Republic of China 电气装置安装工程 电缆线路施工及验收规范 Code for construction and acceptance of cable levels electric equipment installation engineering GB 50168-92 Mainly Preparation by : Ministry of Energy Source of the People’s Repu blic of China Approv ed by : Ministry of Construction of the People’s Repu blic of China Ex ecu tion Date: 07-01-1993 — 2 — Notice on the Issu ance of the National standard 《Code for constru ction and acceptance of the rotating motor in electric equ ipment installation engineering》 JB No. 911 [ 1992 ] According to the requirements of the document of JBH No. 78 (1987) issued by the National Planning Committee and the document of JBZ No. 25 (88), the 5 standards such as 《Code for construction and acceptance of the reeling motor in electric equipment installation engineering》set down by the Energy Source Ministry associated with other departments concerned have been jointly checked up by the concerning authorities. Now the following codes are approved to be applied as compellent national standards: 《Code for construction and acceptance of the reeling motor in electric equipment installat...
