滑模施工方法

MS001 DATE 05/5/08Method StatementFor ： Excavation less than 2 metersOwner ： LafargeContractor: CBMIEstabliSafety manager:Owner Approve(Site Manager） : □yes □yes with comment □ NOSafety Manager : □ yes □yes with comment □NOMS106 Date: 20/06/2009Method StatementFOR: Cement silo concrete casting scheme水泥库施工方案Owner: LafargeContractor: CBMIEstablished by:Checked by:Safety manager:Owner Approve(Site Manager) : □yes □yes with comment □ NOSafety Manager : □ yes □yes with comment□ NOCBMI Construction Co., LTD.Uganda ProjectVersion：11.Work title： Slipform construction 工作名称：滑模The method statement includes： slip form work for cement silo包括：水泥库滑模。2.Description：（说明）1)Explanation of the process（过程说明）Surveying 测量放线Foundation construction have been finished 基础部分施工Revise the reinforcement 钢筋绑扎效正 Fixing and aligning brackets 支承开支架组对调平Fixing and aligning formwork 模板拼装加固、找正Connecting and laying oil pipes 各油路管连接铺设Fixing board on work platform 铺设平台板并固定Setting up platform for reinforcement and other material。 搭设支承架放钢筋等材料Fit climbing rod and hydraulic equipment and aligning 扒杆就位、液压设备就位效正Leveling and aligning the whole assembly work platform 整体调平、找正Connect electrical equipment with power 电气设备电源连接Commissioning 滑模设备就位调试Check hydraulic equipment to make sure all the equipments are in good condition ;检查液压设备状态是否良好Safety induction regarding slip forming works was delivered to operators and other workers, everybody wears the right PPE；安全交底,并穿戴 PPEBarricade the working area。安全围护Set up emergency passage .修建逃生通道上部做防护Switch on after checking。 检查并合上电闸Slip form work starting. 滑模正式开始Afte...