地面砖、花岗岩铺贴施工方案Construction Scheme of Floor tile and Granite tile Installation一、准备工作 Preparations1.弹水平线，确定室内地砖完成面±0。标高.The horizontal line, make sure indoor floor tile finish surface elevatio+ —0。.2。水电管线已安装完毕。Water and electricity line already °deployed二、准备材料 Preparation of materials1。425 水泥及中砂，白水泥.425 cement and medium sand and white cement2。8 * 8 * 25 花岗岩，6 * 6 * 25 花岗岩，6 * 6 * 12 地砖。8 * 8 * 25 granite, 6 * 6 * 25 graiffi)te* 6 * 12floor tile二、施工方法：construction procedure1、工艺流程 construction process材料准备-弹楼地面面层标高控制线-基层处理-弹线找中找方-铺贴基准控制标筋-铺贴面层-铺贴踢脚板-养护与成品保护Prepare materialBomb the ground floor surface elevation control line— Base treatmentBomb line —Lay up the benchmark control standardWindows―screed^ lay up surface courLey up the baseboarMaintenance andprotection for the final product2、铺贴顺序：Tile installation order(1) 、大面积施工时，应用分段顺序铺贴。Large area construction, segmented order paving(2 )、对于整个楼层，要先铺贴独立房间，再铺贴通道或走廊。For the entire buildihgrst tile separate rooms, then passgeways orcorridors.(3) 、对于一般房间采纳退步法先由房间中部向两侧铺贴。对于有独立柱的大厅，要先铺贴柱间部分，然后再向两边展开.For General rooms, use regressiomethod by layingup from thecentral both sides For the great hall with independent column,first tile column sectibnn expand to both sides(4) 、所有房间先铺贴整块板材，非整块板材最后铺贴.地面铺贴完后再铺贴踢脚板。All the rooms firstly paved with blockoplatee at last.Skirting board tiled after the。ground3、铺贴方法：Tile installation method(1) 、以提前做好的标筋为基准，首排板材两边挂线，首排铺贴好后可单边挂线。Baseed on marking screed made beforteie first row plate hang line onWi ―both sides afte...
