基桩低应变完整性测试方法标准VIP专享

Designation: D 5882–00 定名：D 5882-00Standard Test Method for Low Strain Integrity Testing of Piles1基桩低应变完整性测试方法标准This standard is issued under the fixed designation D 5882; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. 本标准出版的固定名称为 D 5882; 紧接其后的数字代表了最初采纳的年份，或修订的年份，或最后修订的年份。圆括号内的数字代表了最后被再次正式批准的年份。上角标（ε）表明从最近的修订或再次批准之后有一个编辑上的改变。1. Scope 适用范围1.1 This test method2 covers the procedure for determining the integrity of individual vertical or inclined piles by measuring and analyzing the velocity (required) and force (optional) response of the pile induced by an (hand held hammer or other similar type) impact device applied axially to the pile normally at the pile head. This test method is applicable to long structural elements that function in a manner similar to foundation piles, regardless of their method of installation provided that they are receptive to low strain impact testing. 该规程适用于检测垂直或倾斜基桩的完整性。采纳的方法是通过手锤或类似物，通常轴向敲击桩顶，在桩顶测量并记录速度（必须地）及力（可选择地）的时程信号，对此进行分析。该测试方法也适用于检测类似基础桩的长状体结构，无论其如何施工，只要低应变激发测试可以利用即可。1.2 This standard may involve hazardous materials, opera-tions, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and...