公司手提电脑外观检测标准

下载后可任意编辑公司手提电脑外观检测标准12024 年 4 月 19 日下载后可任意编辑外观检测标准1.範圍: SCOPE 本文規範 DESKTOP.手提式伺服器(SERVER)以及除了手提式產品 所使用之面板顯示器以及鍵盤等顯示功能產品以外之任何產品. This specification defines the COSMETIC requirements for DESKTOP , PORTABLE ,SERVER ANDOPTION PRODUCTS EXCLUDING DISPLAY SCC individual assembly drawing for cosmetic requirements for assemblies excluded herein.2. 参考文件: PEFERENCE DOCUMENTS 2.1 應用文件:下列文件為本規範的一部分.除非特別指定,否則文件以指 標或申請提案日為生效日期.APPLICAB LE DOCUMENTThe following documents form a part to this specification to the extentSpecified herein. Unless otherwise indicated, the documents is of theIssue if effect on the date of invitation to bid or request for proposal. 2.2.優先順序: ORDER OF PRECED 本文若與其製程管制項目相牴觸,則以製程管制項目為優先. In the event of a conflict between this document and the manufacturing process Details, The manufacturing process details shall take precedence.22024 年 4 月 19 日下载后可任意编辑 本文若與其製程管制項目相牴觸,則以製程管制項目為優先. In the event of a conflict between this document, reference documents and piece Part drawings, the piece part drawings will take precedence.3.檢視方法: INSPECTION METHOD 3.1.目視檢測: 依下列規定檢測. VISUAL INSPECTION Inspection shall be conducted as follows. 3.1.1.照明:目視檢測以工廠常態照明(100±20 呎燭光之冷白螢照明光) 為宜. LightingVisual inspection shall be conducted under normal shop lighting (100±20 Foot candles cool white fluorescent illumination). 3.1.2.位 置: position I.將待測零件置於執行檢測者面前 18 至 24 吋(約手臂長)place the assembly or piece part 18 to 24 inches (arms length) in frontof person performing the inspection . II.應以正對檢測者及垂直於表面(即±45 角度)兩方向進行零件組件 目視檢...