下载后可任意编辑年产 60 万吨棒材生产车间工艺设计12024 年 4 月 19 日下载后可任意编辑年产 60 万吨棒材生产车间工艺设计摘 要本设计为年产 60 万吨棒材车间工艺设计。产品为 Φ16~Φ36mm 的热轧带肋钢筋和圆钢,主要钢种为碳素结构钢,优质碳素结构钢,低合金钢,产品质量执行国家标准。根据成品规格选择尺寸为 150mm×150mm×10000mm 的连铸坯为原料,加热炉为三段步进梁式加热炉。本设计采纳全连续轧制生产工艺,全线共有轧机18 架,其中粗轧机 6 架,中轧机 6 架,精轧机 6 架,终轧最大轧制速度为 13m/s。设计中采纳的孔型系统为:扁箱(1#)—方箱(2#)—椭(3#)—圆(4#)—椭(5#)—圆(6#)—椭(7#)—圆(8#)—椭(9#)—圆(10#)—椭(11#)—圆(12#)—椭(13#)—圆(14#)—椭(15#)—圆(16#)—椭(17#)—圆(18#)。关键词:工艺设计,热轧带肋钢筋,型钢、连铸坯,全连续轧制22024 年 4 月 19 日下载后可任意编辑Process Design of hot rolled bar Workshop with Production Capacity of 600,000 t/aSpecialty:Metal Material EngineeringName:Yang LeiInstructor:Zhao XichengAbstractThis is the technology design for producing six-hundred thounsands tons of hot rolled bar workshop per year. The size of the product is between Φ16 and Φ36 with the major steel grade of the carbon structural steel ,the carbon constructional quality steel or the low alloyed steel.And we carry out national standard during the production .According to the size of product we use the concast billets with the size of 150mm×150mm×10000mm for the raw material and the Walking Beam Heating Furnace . We use continuous rolling technology ,there is 18 mill in common ,6 for roughing mill ,6 for medium mill ,6 for finishing mill . The largest end mill speed is about 13m/s .In the production of steel rolling we use the pass system of square -square - ellipse - circle - ellipse - circle - ellipse -circle - ellipse - circle - ellipse - circle - ellipse -circle-ellipse-circle-ellipse-circle.K...