一:介绍1. 范围2. 概况3. 参考文件二: RADIO FREQUENCY 测试1. 介绍2. 测试环境3. 测试项目3.1 Output power 3.2 Power Control 3.3 Initial Carrier Frequency 3.4 Carrier Frequency Drift 3.5 Modulation Characteristic 3.6 Single Slot Sensitivity 3.7 Multi Slots Sensitivity 3.8 Maximum Input Level 三:蓝牙耳机功能测试1. 耗电量2. 充电、充电连接、显示3. 频率调整4. 配对5. 音频连接6. 仿真音频7. 兼容性8. 通话距离9. 外观结构四:附件功能测试1. 火牛高压2. 火牛输出电压3. SPK 功能4. MIC 功能五:运行条件一:介绍1. 范围此文件概括说明所有蓝牙产品的初步测试计划2. 概况3.1~3.8项目主要描述射频测试,三项主要描述耳机实际使用功能测试,四项主要描述耳机附件的功能测试3. 参考文件[1] Bluetooth: Specification of the Bluetooth System, Volume 2: Core (Controller v1.2 ) [2] Bluetooth: Specification of the Bluetooth System, Volume 3: Core (Host v1.2 ) [3] Bluetooth: Specification of the Bluetooth System, Volume 2: Core (Controller v2.0) [4] Bluetooth: Specification of the Bluetooth System, Volume 3: Core (Host v2.0) [5] Bluetooth: Headset Profile (v1.1) [6] Bluetooth: Core System Package : RF Test Suite Structure (TSS) /Test Purpose(TP) (v2.0) [7] Bluetooth: Core System Package : Baseband Test Suite Structure (TSS) /Test Purpose(TP) (v2.0) [8] Bluetooth: Core System Package : LM Test Suite Structure (TSS) /Test Purpose(TP) (v2.0) [9] Bluetooth: Core System Package : General Access Profile Test Suite Structure (TSS) /Test Purpose(TP) (v2.0) [10]Bluetooth: Headset Profile Specification 1.1 Test Suite Structure (TSS) /Test Purpose(TP) [11]CSR: BlueCore2-Audio Datasheet 二: RADIO FREQUENCY TEST1. 介绍这一个测试是确定蓝牙耳机的射频(发射器和接收器 ) 基本功能是否符合或超过蓝牙标准要求2. 测试环境Bluetooth Tester-- Anritsu MT8852A/MT8852B or other DUT(Device Under Test)- Linnking Bluetooth 3. 测试项目3.1 Outpu...