AGMA9005E02齿轮润滑

ANSI/AGMA9005-E02ANSI/AGMA 9005-E02(Revision ofANSI/AGMA 9005--D94)AMERICAN NATIONAL STANDARDIndu strial Gear Lu bricationiiIndu strial Gear Lu bricationANSI/AGMA 9005--E02(Revision of ANSI/AGMA 9005--D94)Approval of an American National Standard requires verification by ANSI that the require-ments for due process, consensus and other criteria for approval have been met by thestandards developer.Consensus is established when, in the judgment of the ANSI Board of Standards Review,substantial agreement has been reached by directly and materially affected interests.Substantial agreement means much more than a simple majority, but not necessarily una-nimity.Consensus requires that all views and objections be considered, and that aconcerted effort be made toward their resolution.The use of American National Standards is completely voluntary; their existence does notin any respect preclude anyone, whether he has approved the standards or not, frommanufacturing, marketing, purchasing or using products, processes or procedures notconforming to the standards.The American National Standards Institute does not develop standards and will in nocircumstances give an interpretation of any American National Standard. Moreover, noperson shall have the right or authority to issue an interpretation of an American NationalStandard in the name of the American National Standards Institute. Requests for interpre-tation of this standard should be addressed to the American Gear ManufacturersAssociation.CAUTION NOTICE: AGMA technical publications are subject to constant improvement,revision or withdrawal as dictated by experience. Any person who refers to any AGMATechnical Publication should be sure that the publication is the latest available from theAssociation o...