下载后可任意编辑减速器三维设计及虚拟装配摘 要本设计主要是针对减速器的动态虚拟装配，通过对零器件结构的分析和比较，设计出一符合技术及工艺要求的减速器，并利用 Pro/E 做出其动态虚拟装配。该设计从分析和拟定传动方案开始，对减速器的结构、箱体、轴类、轴承组件、附件、润滑和密封等都做了详细的设计，并对动态虚拟装配做了相关说明。通过整个设计过程使该减速器符合相关要求，并以动态虚拟的形式装配出来。根据题目知设计的主要任务一是减速器，第二是其动态装配。根据要求采纳的是二级锥齿轮减速，并且通过下文的设计表明该减速器能达到相关的技术要求。关键词：减速器，动态装配，二级，锥齿轮 I下载后可任意编辑Reducer design and virtual assemblyABSTRACTThis design is mainly aimed at the virtual assembly, based on dynamic zero device structure analysis and comparison, design a technical and process requirements, and using the reducer Pro/E to its dynamic virtual assembly. From the analysis and design of the plan to begin, gear transmission scheme of structure, box, axle bearing parts, accessories, lubrication and sealing all made detailed design, and the dynamic of virtual assembly made related instructions. Through the whole design process makes the speed reducer, and in conformity with the relevant requirements of the virtual assembly form the dynamic.According to the knowledge, the main task of the design topic, the second is a dynamic gear assembly. According to the requirements of the second gear reducer is adopted, and the design that the reducer can reach the related technical requirements.KEY WORDS: Reducer，Dynamic assembly，Secondary，Bevel gearII下载后可任意编辑目 录前 言...........................................................................................1第1 章 机械传动装置的总体设计..........21.1 分析和拟定传动方案................................21.1.1 确定传动方案...........................................21.1.2 传动方案的拟定..........
