电脑桌面
添加小米粒文库到电脑桌面
安装后可以在桌面快捷访问

Zn-Mn-Cu半焦吸附剂的超声辅助加压浸渍法制备及其脱硫与再生性能的研究中期报告

Zn-Mn-Cu半焦吸附剂的超声辅助加压浸渍法制备及其脱硫与再生性能的研究中期报告_第1页
1/1
精品文档---下载后可任意编辑Zn-Mn-Cu 半焦吸附剂的超声辅助加压浸渍法制备及其脱硫与再生性能的讨论中期报告摘要:本文讨论了 Zn-Mn-Cu 半焦吸附剂的超声辅助加压浸渍法制备及其脱硫与再生性能。实验结果表明,采纳超声波辅助加压浸渍方法可以显著提高吸附剂的活性组分含量和分散度,增加毛细孔结构,提高脱硫性能。同时,对 Zn-Mn-Cu 半焦吸附剂进行了多次循环脱硫实验,结果表明吸附剂具有较好的再生性能,再生后的吸附剂性能基本不受影响。关键词:Zn-Mn-Cu 半焦吸附剂;超声波辅助加压浸渍法;脱硫;再生性能Abstract:This paper studies the preparation of Zn-Mn-Cu semi-coke adsorbent by ultrasonic-assisted pressure impregnation method and its desulfurization and regeneration performance. The experimental results show that ultrasonic-assisted pressure impregnation method can significantly increase the content and dispersibility of active components of adsorbent, increase capillary pore structure and improve desulfurization performance. At the same time, the Zn-Mn-Cu semi-coke adsorbent was subjected to multiple cycles of desulfurization experiment, and the results showed that the adsorbent had good regeneration performance, and the performance of the regenerated adsorbent was not affected.Keywords: Zn-Mn-Cu semi-coke adsorbent; ultrasonic-assisted pressure impregnation method; desulfurization; regeneration performance.

1、当您付费下载文档后,您只拥有了使用权限,并不意味着购买了版权,文档只能用于自身使用,不得用于其他商业用途(如 [转卖]进行直接盈利或[编辑后售卖]进行间接盈利)。
2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。
3、如文档内容存在违规,或者侵犯商业秘密、侵犯著作权等,请点击“违规举报”。

碎片内容

Zn-Mn-Cu半焦吸附剂的超声辅助加压浸渍法制备及其脱硫与再生性能的研究中期报告

确认删除?
VIP
微信客服
  • 扫码咨询
会员Q群
  • 会员专属群点击这里加入QQ群
客服邮箱
回到顶部