精品文档---下载后可任意编辑一种模数混合式旁瓣对消系统的仿真与实现的开题报告摘要:本文设计一种模数混合式旁瓣对消系统,其主要由基带信号生成子系统、中频信号生成子系统、数模转换子系统、滤波器子系统、旁路衰减器子系统、合成器子系统以及 DSP 处理器子系统组成。其中,基带信号生成子系统主要负责输入调制信号的生成,中频信号生成子系统主要负责将模拟信号转换成数字信号,并进行滤波处理,数模转换子系统主要用于将数字信号转换成模拟信号,滤波器子系统用于对信号进行滤波处理,旁路衰减器子系统用于控制旁路信号的强度,合成器子系统用于将各个子系统的信号合成后输出,DSP 处理器子系统用于对信号进行处理和算法实现。本文将详细介绍系统的设计思路、流程图、硬件设计方案等,同时,对系统进行仿真与实现测试。关键词:模数混合式旁瓣对消系统,基带信号生成,中频信号生成,数字信号转换,滤波器,合成器,DSP 处理器。Abstract:This paper designs a modulated hybrid sideband cancellation system, which is mainly composed of baseband signal generation subsystem, intermediate frequency signal generation subsystem, digital-to-analog conversion subsystem, filter subsystem, bypass attenuator subsystem, synthesizer subsystem and DSP processor subsystem. Among them, the baseband signal generation subsystem is mainly responsible for the generation of the input modulation signal, the intermediate frequency signal generation subsystem is mainly responsible for converting the analog signal into a digital signal and filtering it, the digital-to-analog conversion subsystem is mainly used for converting the digital signal into an analog signal, and the filter subsystem is used for filtering the signal. Processing, the bypass attenuator subsystem is used to control the strength of the bypass signal, the synthesizer subsystem is used to synthesize and output the signals of various subsystems, and the DSP processor subsystem is used to process the signals and implement algorithms. This paper will introduce the system design ideas, flow charts, hardware design schemes in detail, and simulate and implement tests on the system.Keywords: Modulated hybrid sideband cancellation system, baseband signal generation, intermediate frequency signal generation, digital signal conversion, filter, synthesizer, DSP processor.