电脑桌面
添加小米粒文库到电脑桌面
安装后可以在桌面快捷访问

熔铸温度对Al3Nb铝基复合材料硬度与摩擦磨损性能影响的研究毕业论文

熔铸温度对Al3Nb铝基复合材料硬度与摩擦磨损性能影响的研究毕业论文_第1页
1/34
熔铸温度对Al3Nb铝基复合材料硬度与摩擦磨损性能影响的研究毕业论文_第2页
2/34
熔铸温度对Al3Nb铝基复合材料硬度与摩擦磨损性能影响的研究毕业论文_第3页
3/34
本科毕业论文题 目 : 熔铸温度对 Al3Nb/铝基复合材料硬度与摩擦磨损性能影响的讨论摘 要尖 端 科 学 技 术 在 科 学 技 术 领 域 的 进 展 可 谓 是突飞猛进,人们对材料的性能要求越来越高,在许多方面,例如在设计导弹、人造卫星、飞机的承载构件时,理想的结构材料应具有重量轻、强度和模量高的特点,即比强度和比模量要 高 。 铝 基 复 合 材 料 各 组 分 之 间 可 协 同 作 用, 取长补短,弥补了单相材料的缺点,改进了单相材料的性能,甚至可产生单一材料所不具有的新性能。Al3Nb金属间化合物具有低密度、高模量、高熔点、以与好的循环使用性能等优点,假如应用于铝基复合材料将会产生广泛的应用前景。本文采纳原位反应方法制备了Al3Nb/ 铝基复合材料,利用金相显微镜、维氏硬度计、立式万能磨损试验机对不同熔铸温度下,Al3Nb/ 铝基复合材料组织、硬度与摩擦磨损性能进行分析,得出最佳的熔铸温度为850℃,硬度为63.92HV,并且在接触压力为20N、30N、40N、50N、60N下,磨损量为0.00302g 、 0.00312g 、 0.00332g 、 0.00346g 、 0.00356g 。关 键 词 : 单 相 材 料 , 复 合 材 料 , 熔 铸 温 度AbstractThe development is advanced science and technology in the field of science and technology is make a spurt of progress, people's requirements on the performance of materials is more and more high, in many aspects, such as the bearing structure design of missile, satellite, aircraft, ideal structural material with characteristics of light weight, high strength and modulus, namely the ratio of strength and modulus to high. Can be synergistic effect, the aluminum matrix composite is divided from each other, to make up for the shortcomings of single phase materials, improved the performance of the single-phase materials, new properties and can generate a single material does not have. Al3Nb intermetallic compounds with low density, high melting point, high modulus, and good cycle performance advantages, if used in the aluminum matrix composite materi...

1、当您付费下载文档后,您只拥有了使用权限,并不意味着购买了版权,文档只能用于自身使用,不得用于其他商业用途(如 [转卖]进行直接盈利或[编辑后售卖]进行间接盈利)。
2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。
3、如文档内容存在违规,或者侵犯商业秘密、侵犯著作权等,请点击“违规举报”。

碎片内容

熔铸温度对Al3Nb铝基复合材料硬度与摩擦磨损性能影响的研究毕业论文

确认删除?
VIP
微信客服
  • 扫码咨询
会员Q群
  • 会员专属群点击这里加入QQ群
客服邮箱
回到顶部