毕业设计说明书（论文）中文摘要Ar/CO2不同气体药芯焊丝保护焊接工艺研究摘要：本文对Ar气和CO2气药芯焊丝熔化极保护焊的焊接工艺进行了对比研究，在合理的焊接规范工艺参数下；比较了这两种不同保护气体的熔滴过渡形式，有无飞溅，焊缝成形，熔池形状和力学性能；针对这些现象上的不同，从焊接规范参数、电弧力和焊接时的氧化还原等方面给出了解释。基于焊接工艺的角度，提出了采用Ar+CO2混合保护气体焊接的建议。关键词：CO2气；Ar气；熔化极保护焊；熔滴过渡毕业设计说明书（论文）外文摘要ITitleTechnologyResearchofDifferentGasAr/CO2Flux-coredWireProtectionWeldingAbstractInthispaper,theArgasandCO2gasflux-coredwiremeltingofweldingweldingtechnologyextremelyprotectionmakesacomparativestudy,intherationalweldingstandardprocessparameters.Comparisonofthesetwokindsofdifferentprotectiongasofmeltingdropsoftransitionform,havewithoutsplash,weldpool,poolshapeandmechanicalproperties;Accordingtothephenomenonofthedifferentfromstandardparameters,weldingandweldingarcforcewhenoxidationandreductionoftheexplanationisgiven,etc.Basedonthepointofviewofweldingtechnology,andputforththeAr+CO2mixedgasweldingadviceprotection.Keywords:CO2;Ar;Meltingextremelyprotectionwelding;Meltdropsoftransition毕业设计说明书（论文）目录前言....................................................................................................1第一章绪论.................................................................................21.1CO2气熔化极保护焊...............................................21.1.1CO2气熔化极保护焊原理.........................21.1.2CO2气熔化极保护焊特点.........................21.1.3CO2气熔化极保护焊的冶金特性..31.1.4焊接规范参数的选择.............................41.1.5熔滴过渡..................................................................61.1.6电弧力.........................................................................81.1.7飞溅产生的原因........................................111.1.8减少飞溅的方法........................................111.1.9CO2焊的应用..........................................................131.2Ar气熔化极保护焊...............................................131.2.1Ar气熔化极保护焊原理.....................131.2.2Ar气熔化极保护焊特点.....................131.2.3Ar气熔化极保护焊的焊接技术......141.2.4熔滴过渡..............................................................151.2.5Ar气熔化极保护焊的应用..............171.3本课题研究的内容及目的.....................171.3.1本课题研究的内容................................171.3.2本课题研究目的........................................18第二章焊接材料与设备............................................192.1试样准备.........................................................................192.1.1材料.............................................................................192.1.2气体.............................................................................202.2焊接设备的选择...................................................20II2.3方法........................................................................................21第三章CO2气熔化极保护焊....................................223.1焊接实际.........................................................................223.2焊接参数.........................................................................223.3焊缝成形.........................................................................223.4熔滴过渡.........................
