CQC/13 流程0101.14 Questionnaire for Factory Inspection Name of Applicant: Name of Manu factu rer: Name of Factory : China Quality Certification Center CQC/13 流程0101.14 2010-1-14（ 2/1） W Page 2 of 7 1.1 Factory’s registered name: Factory’s registered address: Note: Factory’s address should be filled in according to the fact, which may be different with the registered address. Factory’s address is the location of final assembling, implementing routine test and verification test, packing and bearing product nameplate and certification mark. If those w orking procedures mentioned above could not be completed in one location, a compared integrated location should be filled out here in w hich at least routine test and verification test, packing, product nameplate and certification mark bearing are implemented, moreover other locations should be indicated w ith geographical places. Tel: Fax: Postcode: E-mail: Directions of the best way of reaching the factory (nearest railway station, airport; attach one photocopy of local map if possible) 1.2 Manufacturer’s registered name: Manufacturer’s registered address: Tel: Fax: Postcode: E-mail: 2. Applicant’s registered name: Applicant’s registered address: Tel: Fax: Postcode: E-mail: Contact person of certification: Department & position: Tel: CQC/13 流程0101.14 2010-1-14（ 2/1） W Page 3 of 7 3. The name, department and position held and telephone number of the factory quality assurance manager Name of the QA manager: Department & Position: Tel: 4. Total number of employees in the factory (If products applied for the certification are only one part of the whole production, please indicate the total number of employees involved in the production and management of...
