BJKE4.23.1 附件5.2上海宝娇化妆品厂有限公司第1页BJKE4.23.1 附件5.2上海宝娇化妆品厂有限公司1. 取样频率参照Sampling according to MIL.Std 105E Level Ⅱ检查项目Test Item标准Criteria测试方法TestMethod结构Construction无导致使用者伤害的突出物, 螺纹无错位, 底部平整。No serious protusions that would be harmful to end user.No screw thread malpositioned, flat bottom.目测Visual杂质（内部）Foreign matter(inside)瓶内无严重污染产品的杂质。（头发、昆虫等）No serious foreign matter (hair, insect,etc.) that contaminates theproduct inside the bottle.目测Visual杂质（外部）Foreign matter(outside)无可能污染产品的杂质（灰尘、油污等）。No foreign matter (dirt, grease, etc.) on the surface that wouldcontaminate the product.目测Visual印刷及内容Print and content正确、完整、清晰，字稿与标样一致。Correct, complete, legible and match approved artwork.目测Visual气泡Bubble无明显气泡，直径0.5mm以内气泡≤3个。No noticeable bubbles, and number of bubbles within 0.5mmdiameter is less than 3.颜色Color符合标样。Conform to the approved Standard Sample.目测Visual外观General appearance符合标样。Conform to the approved Standard Sample.目测Visual结构和组配Construciton andassembly功能性, 与盖等各部件配合良好, 间隙≤1mm, 无泄漏。Functional. Fit properly with the cap and other components. Gap≤1mm, no leakage.目测/手动Visual/Manual关键尺寸Critical size在限度范围内 （见规格书/图纸）Within the limits (refer to the specification/drawing)游标卡尺VernierCaliper印刷附着度Decorationadhesion3M-810胶带, 45°~ 90°用力拉, 文字部分无明显脱落。Applythe 3M-810 Tape, 45°~ 90° pull strongly, no noticeabledecoration falling off.目测Visual重量Weight在限度范围内Within the limit天平Balance满口容量Overflow capacity在限度范围内Within the limit手动/天平Manual/Balance3.Once every lot 每批一次材质Material符合标样。Conform to the approved Standard Sample.目测Visual2. 取样频率参照Sampling according to...
