米其林轮胎技术用语词典 (Michelin tire technology dictionary ) The pressure | Air Pressure The pressure of the air inside the tire is inches per square inch. The metric unit is "PSI" or the metric unit of air pressure. Four wheel positioning | Alignment Adjust all the wheels on the vehicle, makethem in the opposite direction of the road and the best direction of each other, four wheel positioning bad will cause abnormal wear of tires, shorten the service life of tires. All season tire | All-season tyres In the rain and snow weather, it provides better traction balance, and has good tread pattern life, comfort and tranquility of the tire. In order to obtain the maximumsafety guarantee of winter snow and ice pavement, winter tires are recommended Water drift | Aquaplaning An extremely dangerous condition where the water accumulated in front of the tire causes the tire to lose contact with the road. At this point, the vehicle will slip on the water and completely lose control. This phenomenon is called "Shuipiao phenomenon" (hydroplaning). The ratio of height to width | Aspect Ratio Ratio of tire side height to cross section width of tire. Asymmetrical tread design | Asymmetrical Tread Design (AD) The use of different patterns on both sides of the tread can enhance and optimize the control performance of the dry wetland. The tread patterns on the inner tire have more transverse grooves to facilitate drainage Balance / imbalance | Balance/Imbalance Balance refers to the average distribution of the weight of a tire and wheel rim whenit rotates. In adjusting the imbalance, the trained technician will add a weight balance block to the inside or outside of the rim. Michelin BAZ Banded At Zero ...
