CPCI规范结构设计相关内容VIP专享

PICMG 2.0 D3.0CompactPCI SpecificationSeptember 24, 1999DRAFT SPECIFICATIONDO NOT CLAIM CONFORMANCE4. Mechanical RequirementsCompactPCI® Core Specification PICMG 2.0 D3.0 9/24/99Page 43 of 76Draft for PICMG Executive BallotDo not specify or claim conformance to this specification - Not for DistributionFigure 6. 3U Board.4. Mechanical Requ irementsPage 44 of 76PICMG 2.0 D3.0 9/24/99Draft, Not for Distribution – Do Not Claim ConformanceFigure 7. 6U Board.4. Mechanical RequirementsCompactPCI® Core Specification PICMG 2.0 D3.0 9/24/99Page 45 of 76Draft for PICMG Executive BallotDo not specify or claim conformance to this specification - Not for DistributionPCI Industrial Computer Manufacturers Group (PICMG), 301 Edgewater Place, Suite 220, Wakefield, MA 01880 USA, Tel: 781.224.1100, Fax: 781.224.1239, www.picmg.orgFigure 8. Front Side Board ESD Dimensions4. Mechanical Requ irementsPage 46 of 76PICMG 2.0 D3.0 9/24/99Draft, Not for Distribution – Do Not Claim ConformanceFigu re 9. 3U Rear-Panel I/O Board Dimensions4. Mechanical RequirementsCompactPCI® Core Specification PICMG 2.0 D3.0 9/24/99Page 47 of 76Draft for PICMG Executive BallotDo not specify or claim conformance to this specification - Not for DistributionFigure 10. 6U Rear Panel I/O Board Dimensions4. Mechanical Requ irementsPage 48 of 76PICMG 2.0 D3.0 9/24/99Draft, Not for Distribution – Do Not Claim ConformanceFigu re 11. Rear Panel I/O ESD Dimensions11/19/9801CHNGDTOALLMETRICDIM,CHNGD TITLE BLOCK.40.00.25 TYP7.645.053.572.577.52.548.410 MOhm10 MOhmSTRIP 3STRIP 2STRIP 1DETAIL A4/24/98DATENOTES: 1) ESD STRIP LOCATIONS ARE TO BE PROVIDED AT BOTH PRIMARY AND SECONDARY SIDES OF PCB. 2) ONLY THE BOTTOM EDGE OF HOT SWAP BOARDS ARE SPECIFIED FOR ESD STRIP LOCATIONS. 3) THIS DR...