北京理工大学珠海学院 2016 级毕业设计年产 10 万㎡金色不锈钢板年产 10 万㎡金色不锈钢板工艺设计摘要本设计选用型号为 304 不锈钢进行电镀仿金设计，其中仿金采用的是铜锌合金。采用无氰电镀的方法，我们还将电镀不锈钢的工艺流程，做出了简要说明。最后参考了文献选择了配方，进行了物料衡算，也画出了本设计的车间设计图。关键词：304 不锈钢；电镀仿金；工艺流程；物料衡算Annual production of 100,000 ㎡ golden stainless steel plate process design Abstract北京理工大学珠海学院 2016 级毕业设计This design selects the model is 304 stainless steel carries on the electroplating imitation gold design, among which the imitation gold USES is the copper zinc alloy.We also give a brief description of the process of electroplating stainless steel by the method of cyanide-free electroplating.Finally, the formula was selected by reference to the literature, the material balance was calculated, and the workshop design drawing of the design was drawn.Key words: 304 stainless steel;Electroplating imitation gold;Process flow;Material balance目录1 前言.....................................................................................................................11.1 不锈钢板简介..........................................................................................11.2 不锈钢着色研究进展..............................................................................21.2.1 化学着色法...................................................................................21.2.2 真空离子着色法...........................................................................21.2.3 激光氧化着色法...........................................................................21.2.4 离子注入着色法...........................................................................21.2.5 新型超声波热浸着色法...............................................................22 设计方案.......................................................
