中密度纤维板废水处理的工程实例 作者:杨建中——生物碳罐的应用要:通过工程实例论述“沉淀+气浮+UASB-好氧+吸附”工艺在中密度纤维板废水处理中的应用是可行的,其 COD 去除率在 99.8%以上,操作费用 2.80 元/ m3(废水)。处理出水达到《污水综合排放标准》(8978-1996)二级标准,可进行回用,实现零排放。关键词:中密度纤维板废水 沉淀 气浮 UASB 内循环 达标排放 回用 The Engineering Example of Medium Density Fiberboard Wastewater TreatmentWang song-lin1 Yang jian-zhong2(1、Hefei Stip Co.,Ltd,Hefei 230088,China;2、Yixing Meijili Environmental Protection Industry Equipment Co.,Ltd,Yixing 214215,China) Abstract: In this paper, it is dissertated that the process of deposition plus flotation plus UASB-aerobic plus adsorption to treat medium density fiberboard wastewater is feasible. The COD is taken off over percent 99.8 in this process, the cost of operation is 2.8CNY per cubic meters wastewater. The quality of treated wastewater arrive at the second grade criterion that is disserted in National intergrated wastewater discharge standard(8978-1996), The treated wastewater can be recycled, and the quantity of wastewater treated that is blown off is zero。 Keywords:Medium density fiberboard wastewater Deposition Flotation UASB Inner loop Discharge standard Recycling 前言纤维板行业属于高污染行业,其生产过程中产生的高浓度废水,属于难处理的废水之一。以往国内此类废水大多只做了简单的沉淀等预处理设施,没有真正实现达标排放。随着国家环境政策的加强及人们环保意识的提高,许多中密度纤维板公司开始新建或完善自己的废水处理设施。 1 废水的来源、水质及排放标准中密度纤维板废水中污染物的主要成分有可溶性物质及木屑纤维等悬浮物。木材本身含有的可溶性糖类约占其重量的 1%-3%,在生产过程中,这些物质便溶入水中。木片在加热软化后,半纤维素水解成糖类、木质素和有机酸,故废水一般偏酸性。废水中的悬浮物有两种,其一是板坯成型时有部分小纤维及少量的薄壁细胞碎片、树皮碎屑随水流失,悬浮于...