DET NORSKE VERITAS1SesamCrane pedestalDNV Software – GeniE Crane Pedestal WorkshopRevised 12 March 2011Modelling in GeniESesam User Course in Curved Structure ModellingGenie Workshop:Local model of crane pedestal•The purpose of this workshop is to create a model intended for stress analysis of a crane pedestal installed on a floating vessel.•The focus is primarily on making the structure and not the loads nor detailed mesh control. There are 2 loadcases covering selfweight and the mass of the lifting object. In addition there is a load combination accounting for dynamic amplification factor of the crane load.•It is assumed that the user is familiar with structure modelling (beams and plates using snap to point modelling techniques). Furthermore, it is required that the user has basic knowledge on GeniE’s user interface and how the user may interact with the model to derive necessaryinformation (such as length, positions, properties, display settings and so on). Some detailed guidance is given in the beginning of the tutorial to exemplify how to work with GeniE•The workshop is also accompanied with input files for GeniE (Journal file) You need to make mesh and run analysis to see results •This workshop should be viewed on-line or on colour print out to best see the property colour coding. All pictures have been created using “paper background” Default viewing settings have been modified•The structural data as well as the loads are fictitious•This tutorial has been revised with GeniE version D5.3-06 (March 2011) – it may be that you need this or a later version to complete this workshopPart 0 - GeneralDET NORSKE VERITAS2SesamCrane pedestalDNV Software – GeniE Crane Pedestal WorkshopRe...
