Klass.-Nr. 55 11 2 November 2004 Polyamide 66, Finished Parts in the Passenger Compartment Material Requirements VW 501 27 Konzernnorm Descriptors: door handle, pull rod, socket, switch, joint, clips, loudspeaker grille, lever, bearing, interior part, polyamide 66, PA66 D Page 1 of 6 Fachverantwortung/Responsibility Normung/Standards (EZTD, 1733) K-QS-31/4 Peters Tel: -28120 Peterka Frau Krenz Tel: +49-5361-9-48869 Sobanski Confidential. All rights reserved. No part of this document may be transmitted or reproduced without the prior written permission of a Standards Department of the Volkswagen Group. Parties to a contract can only obtain this standard via the responsible procurement department. VOLKSWAGEN AG Norm vor Anwendung auf Aktualität prüfen / Check standard for current issue prior to usage. Form FE 41 - 01.03 1 Scope This standard defines the material requirements for door handles and other parts in the vehicle interior that are made from PA66 with different levels of glass fiber content or glass fiber and mineral mixtures. 2 Description Example of description for type with 15% glass fiber reinforcement: PA66-GF15 according to VW 501 27-PA66-004 or example of description for type with 15% glass fiber reinforcement and 25% mineral reinforcement: PA66-GF15-MD25 according to VW 501 27-PA66-013 3 Requirements 3.1 General requirements Approval of first supply and changes according to Volkswagen standard VW 011 55. Emission behavior according to VW 501 80. Resistance to open air weathering according to VW 501 85. Avoidance of hazardous substances according to VW 911 01. Burning behavior acc. to Technical Supply Specification TL 1010. The number of components required for complete testing depends on th...
