EMG对中系统使用手册

Page 1 Component EVK2-CP/EVM2-CP/LIC Date: 08.09.2004 F:\Daten\tech\local\2005\01\Files0\EMGDES-00000077.doc Component description Optical receiver adjusting devices EVK2-CP/EVM2-CP w ith CAN bus interface Page 2 Component EVK2-CP/EVM2-CP/LIC Date: 08.09.2004 F:\Daten\tech\local\2005\01\Files0\EMGDES-00000077.doc Safety information Control systems using EVK2-CP/EVM2-CP sensors are reliable electrical machines fully in accordance with up to date practice for use in industrial plants. Safety regulations serve to prevent personal injury and damage to property. Important information concerning technical safety and operational safety are marked as follows in this operating manual: CAUTION: This information must be strictly observed, in order to avoid danger to personnel . ATTENTION: This information must be strictly observed, in order to prevent damage to or destruction of machines and machine components. NOTE: This is a reference to technical requirements which should be observed by the user of this Manual. The devices supplied shall only be transported, erected, connected, commissioned, maintained and operated by qualified personnel who are familiar with the applicable safety regulations and erection instructions. Any work carried out must be checked by responsible persons who are suitably qualified. These qualified persons must be authorised by the person responsible for plant security. Qualified persons are those who • are professionally qualified and who have relevant experience • are acquainted with applicable standards, regulations, provisions and accident prevention regulations • have been trained and are fully familiar with the functional and operational conditions of the strip centre control system • are able to detect and...