电脑桌面
添加小米粒文库到电脑桌面
安装后可以在桌面快捷访问

年产20万组医用输液泵用锂电池的生产工艺设计

年产20万组医用输液泵用锂电池的生产工艺设计_第1页
1/69
年产20万组医用输液泵用锂电池的生产工艺设计_第2页
2/69
年产20万组医用输液泵用锂电池的生产工艺设计_第3页
3/69
北京理工大学珠海学院 2020 届本科生毕业设计年产 20 万组医用输液泵用锂电池的生产工艺设计年产 20 万组医用输液泵用锂电池的生产工艺设计摘 要医用输液泵提高了注液的安全性和准确性以及降低了护理的工作强度,在医疗方面起着很大的作用。电池作为医用输液泵的重要组成部分,起着至关重要的作用。目前常用的电池主要为铅酸电池和镍氢电池,但其中铅酸电池存在重量和体积大以及污染较大的问题,镍氢电池存在高温性能差和自放电严重的问题,而且这两种都存在而且使用时间短的问题,因此选择综合性能最好且续航能力更强的锂离子电池作为医用输液泵电池,使医用输液泵的使用时间变长,而且让设备变的更加轻便、便捷。因此本文对医用输液泵用锂电池进行年产 20 万组的工艺设计,在设计的过程中保持目前绿色生产的理念,确定电池生产工艺,选定设计方案,完成工艺计算,设置性能测试,进行设备选型和成本核算,确定三废处理,绘制车间布置图,最终设计出一条完整的生产线。关键词:医用输液泵;锂离子电池;工艺设计北京理工大学珠海学院 2020 届本科生毕业设计The production process design of 200,000 sets of lithium batteries for medical infusion pumps per yearAbstractMedical infusion pumps improve the safety and accuracy of infusion and reduce the intensity of nursing work, and play a great role in medical treatment. As an important part of the medical infusion pump, the battery plays a crucial role. At present, the commonly used batteries are mainly lead-acid batteries and nickel-metal hydride batteries, but the lead-acid batteries have the problems of large weight and volume and large pollution. The nickel-metal hydride batteries have the problems of poor high temperature performance and serious self-discharge, and both There is a problem of short use time. Therefore, the lithium ion battery with the best comprehensive performance and stronger endurance is selected as the medical infusion pump battery, which makes the use time of the medical infusion pump longer, and makes the equipment more...

1、当您付费下载文档后,您只拥有了使用权限,并不意味着购买了版权,文档只能用于自身使用,不得用于其他商业用途(如 [转卖]进行直接盈利或[编辑后售卖]进行间接盈利)。
2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。
3、如文档内容存在违规,或者侵犯商业秘密、侵犯著作权等,请点击“违规举报”。

碎片内容

年产20万组医用输液泵用锂电池的生产工艺设计

确认删除?
VIP
微信客服
  • 扫码咨询
会员Q群
  • 会员专属群点击这里加入QQ群
客服邮箱
回到顶部