广东东软学院本科毕业设计(论文) 基于 Flexsim 的低价值货物进出库仿真与优化 SIMULATION AND OPTIMIZATION OF OUT AND IN STORAGE ABOUT LOW-PRICE PRODUCT BASED ON FLEXSIM 广东东软学院本科毕业设计(论文)内容摘要随着物流行业的蓬勃发展,物流业成为衡量我国综合实力的重要指标之一。而仓储是当今物流行业运输中不可或缺的部分,进出入库是仓储运作的流程之一,所以优化它是提高仓储效率的好办法。本文同时介绍Flexsim 软件和仓储的作用与低价值产品的意义,通过图解步骤来介绍如何使用 Flexsim 软件。通过使用 Flexsim 软件,对实际仓库中的进出入库流程进行模拟,生成三维的立体仿真模型。使用模型优化不合理的部分,逐渐通过不同的仿真结果对比,将问题一一改善。记录下优化前后的差异,提出改进建议,减少企业实际改进的试验成本。一次次仿真结果上看,优化有效缓解了货架堆积、设备超负荷运作与人员工作强度大的问题,为进行优化决策管理者找到问题提供方法并模拟效果。关键词: 仓储;Flexsim;物流仿真;优化 广东东软学院本科毕业设计(论文)AbstractWith the logistics industry of booming development, the logistics industry has become one of the important indicators of China’s comprehensive strength. And warehousing plays an significant part in the logistics transportation. In and out of warehouse, which is one of the process in the warehouse operation. So, it is the best idea to improve the warehousing efficient. Firstly, this paper introduces the function of Flexsim software and storage, and then illustrated how to use Flexsim software through illustrated steps. Using Flexsim simulation software to simulate the in-or-out warehouse processes in the actual warehouse, optimizes them to generate a 3D simulation model. Use the model to optimize the unreasonable part, improve the problem one by one gradually through the comparison of different simulation results. Recording the differences before and after the optimization, raising the improvement suggestions, and reducin...