运用pkpm软件对异形柱框架结构的设计与分析

毕业设计报告专业： 指导老师： 作者： 班级： 系别： 九江职业技术学院 年 月 日运用 PKPM 软件对大余县保障性住房及安置房小区 1#楼多层异形柱框架结构的设计与分析 摘要 钢筋混凝土异形柱结构体系是以 L 形，T 形，十字形等截面形式构成的体系。初步介绍了异形柱结构的国内外讨论现状、结构体系特点及基本设计原则。本文结合大余县保障性住房及安置房小区 1#楼的工程项目，采纳异形柱框架结构体系，运用 PKPM 结构设计软件进行计算，并对其计算结果的主要参数（柱轴压比，剪重比，刚度比，有效质量系数，位移比，周期比）进行分析及调整，并对其人工合理化调控的原理及方法进行论述。关键词：异形柱框架结构，PKPM，计算分析，参数控制Using the PKPM software to DaYuXian affordable housing and the residential housing for 1 # floor design and analysis of multi-story frame structure with special-shaped columns Abstract Steel reinforced concrete special-shaped column structural system is l-shaped, t-shaped and cross-shaped cross section such as the form of system. Preliminary structure with special-shaped columns is introduced domestic and foreign research present situation, structure characteristics and the basic design principles. Combining DaYuXian affordable housing and the residential housing for 1 # building project, adopts special-shaped column frame structure system, using PKPM structure design software to calculate, and the results of the calculation of main parameters (the column axial compression ratio, shear weight ratio, stiffness ratio, the effective mass coefficient, displacement ratio and period ratio) analysis and adjustment, rationalization and the artificial control is discussed. The principles and methods of controlKey words: frame structure with special-shaped columns, PKPM, calculation and analysis ，parameter control目 录摘要................................................................1Abstract...................................