摘要本设计选煤厂为年处理能力120万吨矿区型炼焦煤选煤厂
入选原煤属于较难选煤
通过对煤质资料进行充分的分析,最终确定选煤工艺流程为预先脱泥-无压三产品重介旋流器、浮选联合分选流程
入选原煤选前脱泥,脱泥后0
0mm粒级煤采用重介旋流器分选,-0
5mm煤泥采用浓缩浮选的工艺流程
原煤经分选后,其最终精煤产率为72
04%,,灰分为9
47%,水分为10
44%;中煤产率为18
99%,灰分为27
86%;矸石产率为8
97%,灰分为72
86%;以上指标均达到设计的要求
本流程采用了预先脱泥,提高了无压三产品重介旋流器分选精度和效率,并且提高了介质的回收;浮选精煤、尾煤都采用压滤;全厂洗水实现闭路循环,达到环保要求
厂区、厂房布置合理、规范,各生产环节符合规范要求
选煤厂工作制度定为每年330天,每天16小时
关键词:脱泥;三产品重介旋流器;煤泥水ABSTRACTThisdesignisforacentralcoalpreparationplantofcokingcoal,ofwhichthrough-putcapacityis1
2milliontoneveryyear
Thisrawcoalbelongstoaratherdifficultgradingofcoal
Accordingtocoaldistrinctandcoalquality,itemploystechnologicalprocessofdeslimingbeforeseparation,heavy-mediumcyclonewithtripleproductofzero-pressurefeed,combiningwithflotation
Therawcoaltobedressedwouldbedeslimedbeforeseparation
Afteritsdesliming,coa