Solidworks紧固件中英文名称对照表VIP免费

序号Item 中文品名Description in Chinese 英文品名Desciption in English 国际标准ISO-Standard 中国标准GB-Standard 1 圆锥销 Taper pins ISO2339 GB117 2 圆柱销 Parallel pins ISO2339 GB119-86 3 开槽圆柱头螺钉 Slotted cheese head screws ISO1207 GB65-85 4 开槽盘头螺钉 Slotted pan head screws ISO1580 GB67-85 5 单耳止动垫圈 Tab washers GB854 6 开口销 Split cooter pins ISO1234 GB91 7 开槽半沉头木螺钉 Slotted raised csk head wood screws GB101 8 开槽半圆头木螺钉 Slotted round head wood screws GB99 9 开槽沉头木螺钉 Slotted countersunk head wood screws GB100 10 平垫 Plain washers ISO7089 GB97.1-85 11 平垫（带倒角） Mediun washers ISO7090 GB97.2-85 12 平垫 Plain washers ISO7091 13 重型弹垫 Spring lock washers,tang ends GB7244 14 标准弹垫 Spring lock washers,square ends GB93-87 15 鞍形弹垫 Single coil spring lock washers GB7245-87 16 弹簧止动垫圈 Curved spring washers 17 波形弹垫 Wave spring washers GB955 18 T 型方颈螺栓 T-head blots with square neck GB37-88 19 T 型双接头螺栓 T-head bolts with double nip 20 螺纹圆锥销 Taper pins with threaded end ISO8737 21 T 型头螺栓 T-head bolts 22 蝶型螺母（美制） Wing nuts America form 23 蝶型螺母（德制） Wing nuts germany form GB62-88 24 蝶型螺母（美制） Wing screws America form 25 蝶型螺母（德制） Wing screws germany form 26 圆球型盖型螺母 Ball knobs 27 开槽带孔球面圆柱头蚴钉 Slotted capstan screws GB832-88 28 开槽长圆柱端紧定螺钉 Slotted set srews with full dog point ISO7435 GB75-85 29 开槽平端紧定螺钉（半牙） Slotted set srews with chamfered end ISO2342 GB73-85 30 小六角特薄细牙螺母 Pip nuts with thread GB808-88 31 外舌止动垫圈 External tap GB856-88 32 小垫圈(用于圆柱头螺钉) Washers for cheese head screws ISO7092 GB848-95 33 方斜垫圈（ U 型） Square taper washers for U-section GB852-88 34 方斜垫圈（ I...