风力机第一部分：设计要求1 范围为保证风力机的工程完整性，IEC61400 的这个部分详细说明了基本设计要求。其目的是制定一个恰当的保护等级，以防止机组在计划寿命期内受到损坏。本标准设计涉及到风力机的各子系统，如控制和保护机构，内部电气系统，机械系统及支撑结构。本标准适用于各种大小的风力机。对于小型风力机IEC61400-2可能适用。本标准应与第二部分提到的 IEC 和 ISO 标准结合使用。2 引用标准下列标准所包含的条文，通过在本标准中引用而成为本标准的条文。凡是注日期的引用文件，只有被引用的版本适合本标准。凡是不注日期的引用文件，其最新版本（包括任何的修订）适用于本标准。IEC 60204-1:1997, Safety of machinery – Electrical equipment of machines –Part 1: General requirementsIEC 60204-11:2000, Safety of machinery – Electrical equipment of machines –Part 11:Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 Vd.c. and notexceeding 36 kVIEC 60364 (all parts), Electrical installations of buildingsIEC 60721-2-1:1982, Classification of environmental conditions – Part 2:Environmental conditions appearing in nature. Temperature and humidityIEC 61000-6-1:1997, Electromagnetic compatibility (EMC) – Part 6: Genericstandards –Section 1: Immunity for residential, commercial and light-industrialenvironmentsIEC 61000-6-2:1999, Electromagnetic compatibility (EMC) – Part 6: Genericstandards –Section 2: Immunity for industrial environments 15IEC 61000-6-4:1997, Electromagnetic compatibility (EMC) – Part 6: Genericstandards –Section 4: Emission standard for industrial environmentsIEC 61024-1:1990, Protection of structures against lightning – Part 1: GeneralprinciplesIEC 61312-1:1995, Protection against lightning electromagnetic impulse – Part 1:General principleIEC 61400-21:2001, Wind turbine generator systems – Part 21: Measurementand assessment of power quality characteristics of grid connected wind turbinesIEC 61400-24: ...
