Designation: A 1016/A 1016M – 02aStandard Specification forGeneral Requirements for Ferritic Alloy Steel, AusteniticAlloy Steel, and Stainless Steel Tubes1This standard is issued under the fixed designation A 1016/A 1016M; the number immediately following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon (e ) indicates an editorial change since the last revision or reapproval.1. Scope *1.1 This specification covers a group of requirements that,unless otherwise specified in an individual specification, shallapply to the ASTM product specifications noted below.Title of SpecificationASTMDesignationASeamless Carbon-Molybdenum Alloy-Steel Boiler andSuperheater TubesA 209/A 209MSeamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater,and Heat-Exchanger TubesA 213/A 213MWelded Austenitic Steel Boiler, Superheater, Heat-Exchanger,and Condenser TubesA 249/A 249MElectric-Resistance-Welded Ferritic Alloy-Steel Boiler andSuperheater TubesA 250/A 250MSeamless and Welded Ferritic and Martensitic Stainless SteelTubing for General ServiceA 268/A 268MSeamless and Welded Austenitic Stainless Steel Tubing forGeneral ServiceA 269Seamless and Welded Austenitic Stainless Steel Sanitary Tubing A 270Seamless and Welded Carbon and Alloy-Steel Tubes forLow-Temperature ServiceA 334/A 334MSeamless and Electric-Welded Low-Alloy Steel TubesA 423/A 423MWelded Austenitic Stainless Steel Feedwater Heater TubesA 688/A 688MAustenitic Stainless Steel Tubing for Breeder Reactor CoreComponentsA 771Seamless and Welded Ferritic/Austenitic Stainless Steel Tubingfor General ServiceA 789/A 789MWelded Ferritic Stainless Steel Feedwater Heater Tube...