Designation: D 3299 – 00An American National StandardStandard Specification forFilament-Wound Glass-Fiber-Reinforced Thermoset ResinCorrosion-Resistant Tanks1This standard is issued under the fixed designation D 3299; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.1. Scope*1.1 This specification covers cylindrical tanks fabricated byfilament winding for above-ground vertical installation, tocontain aggressive chemicals at atmospheric pressure as clas-sified herein, and made of a commercial-grade polyester orvinylester resin. Included are requirements for materials, prop-erties, design, construction, dimensions, tolerances, workman-ship, and appearance.1.2 This specification does not cover the design of vesselsintended for pressure above atmospheric, vacuum conditions,except as classified herein, or vessels intended for use withliquids heated above their flash points.1.3 The values given in parentheses are provided for infor-mation purposes only.NOTE 1—Special design considerationshould be given to vesselssubject to superimposed mechanical forces, such as earthquakes, windload, or agitation, and to vessels subject to service temperature in excessof 180°F (82°C), and to vessels with unsupported bottoms.NOTE 2—There is no similar or equivalent ISO standard.1.4 The following safety hazards caveat pertains only to thetest method portion, Section 11, of this specification:Thisstandard does not purport to address a...